Javier Sánchez Prieto

Contact information
Office: 1.1.D.19
Phone: +34 91 624 6032
Email: jsprieto@ing.uc3m.es
Position: PhD Student

EDUCATION

  • Chemical Engineering (Universidad Complutense de Madrid) in 2009.
  • Thermal Engineering and Fluid Mechanics Master (Carlos III University of Madrid) in 2010.

RESEARCH LINES

  • Fluidized bed dynamics
    • Fluid dynamics
    • Agglomeration
    • Measurements techniques and monitoring
  • Fluidized bed applications
    • Gasification
  • Biomass
    • Biomass characterization (Biolab)

RESEARCH STAYS

Delf University of Technology
Product and Processing Engineering
Delft, The Netherlands
(Sep 2012 – Dec 2012)

TEACHING ACTIVITIES

Thermal Engineering

PUBLICATIONS

Journal publications

The effect of temperature on the distributor design in bubbling fluidized beds.
Powder Technology 261, 176-184. 2014
J.Sánchez-Prieto, A. Soria-Verdugo, J.V. Briongos, D. Santana.

Feedback PID-like fuzzy controller for pH regulatory control near the equivalence point.
Journal of Process Control 24, 1023-1037. 2014
M.C. Heredia-Molinero, J. Sánchez-Prieto, J.V. Briongos, M.C. Palancar.

Wide band energy analysis of fluidized bed pressure fluctuation signals using a frequency division method.
Chemical Engineering Science 105, 92-103. 2014
J.Gómez-Hérnandez, J. Sánchez-Prieto, J.V. Briongos, D. Santana.

Moving bed syngas conditioning: Modelling.
Applied Thermal Engineering 62, 809-802. 2014
A.Gómez-García, J. Sánchez-Prieto, A. Soria-Verdugo, D. Santana.

A settling tube to determine the terminal velocity and size distribution of fluidized nanoparticle agglomerates.
Journal of Nanoparticles Research. 2014, Brief Communication
Lilian de Martín, J. Sánchez-Prieto, F. Hernández-Jiménez, J. Ruud van Ommen.

Experimental quantification of the particle-wall frictional forces in pseudo-2D gas fluidized beds.
Chemical Engineering Science 102, 257-267. 2013
F. Hernández-Jiménez, J. Sánchez-Prieto, A. Soria-Verdugo, A. Acosta-Iborra.

Conference proceedings

A Sampling Method to Determine the Terminal Velocity and Size Distribution of Fluidized Nanopowder Agglomerates.
Proceedings of CFB11, 2014
L. de Martin, J. Sánchez-Prieto, F. Hernández-Jiménez, J. Ruud van Ommen

Estimation of the circulating time in a large-scale fluidized bed using DBM simulation data.
The 14th International Conference on Fluidization – From Fundamental to Products, 2013.
J.Sánchez-Prieto, S. Sánchez-Delgado, N. García-Hernando, J.V. Briongos.

Characterization of the bubble behavior in vibrated fluidized beds by means of two-fluid CFD simulations coupled with accelerometry data
The 14th International Conference on Fluidization – From Fundamental to Products, 2013.
E. Cano-Pleite, J. Gómez-Hernández, J. Sánchez-Prieto, A. Acosta-Iborra.

Linking of the pressure oscillation in a pseudo two-dimensional bed with the spatiotemporal distribution of particles.
The 14th International Conference on Fluidization – From Fundamental to Products, 2013.
F. Hernández-Jiménez, J. Sánchez-Prieto, A. Soria-Verdugo, A. Acosta-Iborra.

Using DBM to study the effect of biomass feeding in the dynamic behaviour of a large scale bubbling fluidized bed.
Proceedings of 21FBC, 2012
J. Sánchez-Prieto, A. Gómez-García, J. Villa-Briongos, D. Santana.

Modelling of biomass fluidized bed reactors: application to biomass gasification.
Proceedings of 7th National (Spain) Congress of Thermodinamics Engineering, 2011
A. Gómez-García, J. Sánchez-Prieto, J. Villa-Briongos, D. Santana.