2023
Zuzelski M.; Laporte-Azcué M.; Cordeiro J.; Dhakal S.; Daghigh V.; Keller M.; Ramsurn H.; Otanicar T., Design of a novel carbon/carbon composite microvascular solar receiver, (2023) Solar Energy, 262, art. no. 111794
Álvarez-Bermúdez C.; Anca-Couce A.; Chapela S.; Scharler R.; Buchmayr M.; Gómez M.Á.; Porteiro J., Validation of a biomass conversion mechanism by Eulerian modelling of a fixed-bed system under low primary air conditions, (2023) Renewable Energy, 215, art. no. 119003
Laporte-Azcué M.; Acosta-Iborra A.; Otanicar T.P.; Santana D., Real-time estimation of the transient thermomechanical behaviour of solar central receivers, (2023) Thermal Science and Engineering Progress, 41, art. no. 101834
Shirmohammadi R.; Aslani A.; Batuecas E.; Ghasempour R.; Romeo L.M.; Petrakopoulou F., A comparative life cycle assessment for solar integration in CO2 capture utilized in a downstream urea synthesis plant, (2023) Journal of CO2 Utilization, 74, art. no. 102534
Steiner T.; Schulze K.; Scharler R.; Anca-Couce A., Extension of the layer particle model for volumetric conversion reactions during char gasification, (2023) Combustion and Flame, 256, art. no. 112940
Ramón-Álvarez I.; Batuecas E.; Sánchez-Delgado S.; Torres-Carrasco M., Mechanical performance after high-temperature exposure and Life Cycle Assessment (LCA) according to unit of stored energy of alternative mortars to Portland cement, (2023) Construction and Building Materials, 365, art. no. 130082
Ramón-Álvarez I.; Sánchez-Delgado S.; Peralta I.; Caggiano A.; Torres-Carrasco M., Experimental and computational optimization of eco-friendly mortar blocks for high
temperature thermal energy storage of concentrated solar power plants, (2023) Journal of Energy Storage, 71, art. no. 108076
De León-Ruiz J.E.; Carvajal-Mariscal I.; Venegas M.; Beltrán-Chacón R.; De la Cruz-Ávila M., Efficiency assessments of a compound cooling system for low-humidity applications, (2023) Applied Thermal Engineering, 234, art. no. 121355
Rodríguez-Sánchez M.R.; Pueyo-Balsells A.; Montoya A.; Artero-Guerrero J.A., Solar simulator based on induction heating to characterize experimentally tubular solar central receivers, (2023) Applied Thermal Engineering, 220, art. no. 119781
von Berg L.; Anca-Couce A.; Hochenauer C.; Scharler R., Multi-scale modelling of a fluidized bed biomass gasifier of industrial size (1 MW) using a detailed particle model coupled to CFD: Proof of feasibility and advantages over simplified approaches, (2023) Energy Conversion and Management, 286, art. no. 117070
Ghatos S.; Venegas M.; de Vega M.; Taha-Janan M.; García-Hernando N., Experimental evaluation of the transient and steady state performance of an air-cooled square minichannel heat exchanger, (2023) International Journal of Thermal Sciences, 188, art. no. 108255
Pardillos-Pobo D.; González-Gómez P.A.; Laporte-Azcué M.; Santana D., Thermo-economic design of an electric heater to store renewable curtailment in solar power tower plants, (2023) Energy Conversion and Management, 297, art. no. 117710
Cano-Pleite E.; Hernández-Jiménez F.; García-Gutiérrez L.M.; Soria-Verdugo A., Thermo-economic optimization of a novel confined thermal energy storage system based on granular material, (2023) Applied Thermal Engineering, 224, art. no. 120123
Gómez M.A.; Álvarez-Bermúdez C.; Chapela S.; Anca-Couce A.; Porteiro J., Study of the effects of thermally thin and thermally thick particle approaches on the Eulerian modeling of a biomass combustor operating with wood chips, (2023) Energy, 281, art. no. 128243
Batuecas E.; Taramona S.; Gómez-Hernández J.; Briongos J.V., Environmental and energetic behavior of a Beam-down linear Fresnel solar field for low-grade thermal energy applications, (2023) Applied Thermal Engineering, 231, art. no. 121002
De León-Ruiz J.E.; Beltrán-Chacón R.; Carvajal-Mariscal I.; Venegas M.; De La Cruz-Ávila M., Effect of vessel dimensional ratio on heat conveyance capabilities of gravity-assisted heat pipes: Theoretical and experimental approach, (2023) Thermal Science and Engineering Progress, 45, art. no. 102091
Soria-Verdugo A.; Guil-Pedrosa J.F.; Hernández-Jiménez F.; García-Gutiérrez L.M.; Cano-Pleite E.; García-Hernando N., Experimental analysis of a novel confined bed system for thermal energy storage, (2023) Journal of Energy Storage, 69, art. no. 107972
Pérez-Álvarez R.; Marugán-Cruz C.; Santana D.; Acosta-Iborra A., Influence of eccentricity on the thermomechanical performance of a bayonet tube of a central solar receiver, (2023) Applied Thermal Engineering, 223, art. no. 119988
Soria-Verdugo A.; Cano-Pleite E.; Passalacqua A.; Fox R.O., Effect of particle shape on biomass pyrolysis in a bubbling fluidized bed, (2023) Fuel, 339, art. no. 127365
Pérez-Álvarez R.; Montoya A.; López-Puente J.; Santana D., Solar power tower plants with Bimetallic receiver tubes: A thermomechanical study of two- and three-layer composite tubes configurations, (2023) Energy, 283, art. no. 129170
Yousef M.S.; Santana D., Thermodynamic and exergoeconomic optimization of a new combined cooling and power system based on supercritical CO2 recompression Brayton cycle, (2023) Energy Conversion and Management, 295, art. no. 117592
Díaz-Alonso S.; Sánchez-González A.; Hernández-Jiménez F.; Soria-Verdugo A., Modeling sensible thermal energy storage in solid blocks for concentrating solar power, (2023) Results in Engineering, 18, art. no. 101051
Soria-Verdugo A.; Guil-Pedrosa J.F.; Hernández-Jiménez F.; García-Gutiérrez L.M.; Cano-Pleite E.; García-Hernando N., Experimental study of the discharge process of a thermal energy storage system based on granular material operated as a fluidized or confined bed, (2023) Journal of Energy Storage, 73, art. no. 109173
Batuecas E.; Serrano D.; Horvat A.; Abelha P., Sustainable conditions for waste tires recycling through gasification in a bubbling fluidized bed, (2023) Journal of Cleaner Production, 415, art. no. 137839
Ruiz-Rivas U.; Tirado-Herrero S.; Castaño-Rosa R.; Martínez-Crespo J., Disconnected, yet in the spotlight: Emergency research on extreme energy poverty in the Cañada Real informal settlement, Spain, (2023) Energy Research and Social Science, 102, art. no. 103182
Gómez-Hernández J.; Grimes R.; Briongos J.V.; Marugán-Cruz C.; Santana D., Carbon dioxide and acetone mixtures as refrigerants for industry heat pumps to supply temperature in the range 150–220 oC, (2023) Energy, 269, art. no. 126821
Marugán-Cruz C.; Fernández-Torrijos M.; Sobrino C.; Santana D., Assessment of Climate Change Impacts and Water Restrictions on Solar Tower Plants, (2023) International Journal of Energy Research, 2023, art. no. 4830467
Trubetskaya A.; von Berg L.; Johnson R.; Moore S.; Leahy J.J.; Han Y.; Lange H.; Anca-Couce A., Production and characterization of bio-oil from fluidized bed pyrolysis of olive stones, pinewood, and torrefied feedstock, (2023) Journal of Analytical and Applied Pyrolysis, 169, art. no. 105841
Yousef M.S.; Santana D., Energy and exergy analyses of a recompression supercritical CO2 cycle combined with a double-effect parallel absorption refrigeration cycle, (2023) Energy Reports, 9, 195-201
Fernández-Delgado S.; García-Peñas A.; Serrano D.; Cerrada M.L.; Gómez-Elvira J.M., Detailed microstructure analysis through monomeric insertion modes of poly(propylene-co-norbornene) copolymers and poly(propylene-co-ethylene-co-norbornene) terpolymers with low norbornene contents, (2023) Polymer Testing, 124, art. no. 108081
Sánchez-García D.; Martínez-Crespo J.; Hernando U.R.-R.; Alonso C., A detailed view of the Adaptive-Comfort-Control-Implementation Script (ACCIS): The capabilities of the automation system for adaptive setpoint temperatures in building energy models, (2023) Energy and Buildings, 288, art. no. 113019
El Hassani S.; Oueslati F.; Horma O.; Santana D.; Moussaoui M.A.; Mezrhab A., Techno-economic feasibility and performance analysis of an islanded hybrid renewable energy system with hydrogen storage in Morocco, (2023) Journal of Energy Storage, 68, art. no. 107853
Ramón-Álvarez I.; Marugán-Cruz C.; Enríquez E.; Sánchez-Delgado S.; Torres-Carrasco M., Alkali-activated and hybrid materials: Alternative to Portland cement as a storage media for solar thermal energy; [Materiales activados alcalinamente e híbridos: alternativas al cemento Portland como medio de almacenamiento de energía térmica solar], (2023) Boletin de la Sociedad Espanola de Ceramica y Vidrio, 62, 160-173
Simbolon L.M.; Pandey D.S.; Horvat A.; Leahy J.J.; Tassou S.A.; Kwapinska M., Influence of the pyrolysis temperature on fresh and pelletised chicken litter with focus on sustainable production and utilisation of biochar, (2023) Biomass Conversion and Biorefinery, , art. no.
Erasmus D.J.; Sánchez-González A.; Lubkoll M.; Craig K.J.; von Backström T.W., Thermal performance characteristics of a tessellated-impinging central receiver, (2023) Applied Thermal Engineering, 229, art. no. 120529
2022
Zachl A., Soria-Verdugo A., Buchmayr M., Gruber J., Anca-Couce A., Scharler R., Hochenauer C., Stratified downdraft gasification of wood chips with a significant bark content, (2022) Energy, 261, art. no. 125323
Zachl A., Buchmayr M., Gruber J., Anca-Couce A., Scharler R., Hochenauer C., Development of stability criteria for biomass open-top downdraft gasifiers, (2022) Journal of the Energy Institute, 105, 442-453
Petrakopoulou F., García-Tenorio Corcuera E., Introducing the total efficiency to address challenges of the 21st century, (2022) Journal of Cleaner Production, 374, art. no. 133409
Pérez-Álvarez R., González-Gómez P.Á., Santana D., Acosta-Iborra A., Preheating of solar power tower receiver tubes for a high-temperature chloride molten salt, (2022) Applied Thermal Engineering, 216, art. no. 119097
McLaren C.P., Leistner B.J., Pinzello S., Cano-Pleite E., Müller C.R., Onset and dynamics of avalanches in a rotating cylinder: From experimental data to a geometric model, (2022) Physical Review E, 106-5, art. no. 54902
Li A., Jiménez F.H., Pleite E.C., Wang Z., Zhu L., Numerical comparison of thermal energy performance between spouted, fluidized and fixed beds using supercritical CO2as fluidizing agent, (2022) Case Studies in Thermal Engineering, 39, art. no. 102469
Serrano D., Horvat A., Batuecas E., Abelha P., Waste tyres valorisation through gasification in a bubbling fluidised bed: An exhaustive gas composition analysis, (2022) Renewable Energy, 200, 1438-1446
Sánchez-González A., Lozano-Cancelas A., Morales-Sánchez R., Castillo J.C., Canting heliostats with computer vision and theoretical imaging, (2022) Renewable Energy, 200, 957-969
Maziarka P., Anca-Couce A., Prins W., Ronsse F., A meta-analysis of thermo-physical and chemical aspects in CFD modelling of pyrolysis of a single wood particle in the thermally thick regime, (2022) Chemical Engineering Journal, 446, art. no. 137088
Fonseca F.G., Anca-Couce A., Funke A., Dahmen N., Challenges in Kinetic Parameter Determination for Wheat Straw Pyrolysis, (2022) Energies, 15-19, art. no. 7240
Pérez-Álvarez R., Cano-Pleite E., Santana D., Acosta-Iborra A., Impact of a mechanical attachment on the preheating temperatures of a central receiver tube, (2022) Applied Thermal Engineering, 215, art. no. 118854
Venegas M., Ghatos S., de Vega M., García-Hernando N., Experimental evaluation of a new mini square channel air-cooled heat exchanger for an absorption chiller, (2022) International Journal of Heat and Mass Transfer, 195, art. no. 123186
von Berg L., Anca-Couce A., Hochenauer C., Scharler R., Multi-scale modelling of fluidized bed biomass gasification using a 1D particle model coupled to CFD, (2022) Fuel, 324, art. no. 124677
Montoya A., López-Puente J., Santana D., Longitudinal supports shape influence on deflection and stresses in solar receiver tubes, (2022) Renewable Energy and Power Quality Journal, 20, 204-209
de Vega M., Venegas M., García-Hernando N., Viability on the desorption and air condensation of water in a compact membrane-based microchannel desorber-condenser for cooling applications, (2022) Energy Conversion and Management, 267, art. no. 115919
Soria-Verdugo A., Cano-Pleite E., Panahi A., Ghoniem A.F., Kinetics mechanism of inert and oxidative torrefaction of biomass, (2022) Energy Conversion and Management, 267, art. no. 115892
Zachl A., Buchmayr M., Gruber J., Anca-Couce A., Scharler R., Hochenauer C., Air preheating and exhaust gas recirculation as keys to achieving an enhanced fuel water content range in stratified downdraft gasification, (2022) Fuel, 323, art. no. 124429
Carvajal-Mariscal I., De León-Ruiz J.E., Vázquez-Arenas J., Venegas M., Effect of Working Fluid-Filling Ratio Combination on Thermosyphon Performance as Add-In Enhancer for Indoor Air Conditioning Devices, (2022) Energies, 15-16, art. no. 5939
Soria-Verdugo A., Cano-Pleite E., Panahi A., Ghoniem A.F., Partitioning of a wide bubbling fluidized bed with vertical internals to improve local mixing and bed material circulation, (2022) Powder Technology, 408, art. no. 117771
Anca-Couce A., von Berg L., Pongratz G., Scharler R., Hochenauer C., Geusebroek M., Kuipers J., Vilela C.M., Kraia T., Panopoulos K., Funcia I., Dieguez-Alonso A., Almuina-Villar H., Tsiotsias T., Kienzl N., Martini S., Assessment of measurement methods to characterize the producer gas from biomass gasification with steam in a fluidized bed, (2022) Biomass and Bioenergy, 163, art. no. 106527
Serrano D., Sánchez-Delgado S., Pérez-Álvarez R., Acosta-Iborra A., Experimental determination of the convection heat transfer coefficient in an eccentric annular duct, (2022) Experimental Thermal and Fluid Science, 136, art. no. 110664
Sánchez-González A., Analytic function for heliostat flux mapping with astigmatism and defocus, (2022) Solar Energy, 241, 24-38
Moreno J.A., Montoya A., López-Puente J., Santana D., Lifetime optimization of solar central receivers via linear actuators, (2022) International Journal of Mechanical Sciences, 226, art. no. 107388
Archan G.A.R., Scharler R., Buchmayr M., Kienzl N., Hochenauer C., Gruber J., Anca-Couce A., Minimization of inorganic particulate matter emissions with a novel multi-fuel combustion technology that enhances inorganic retention in a compact updraft fixed-bed, (2022) Fuel, 318, art. no. 123611
Arrif T., Hassani S., Guermoui M., Sánchez-González A., A.Taylor R., Belaid A., GA-GOA hybrid algorithm and comparative study of different metaheuristic population-based algorithms for solar tower heliostat field design, (2022) Renewable Energy, 192, 745-758
González-Gómez P.A., Laporte-Azcué M., Fernández-Torrijos M., Santana D., Design optimization and structural assessment of a header and coil steam generator for load-following solar tower plants, (2022) Renewable Energy, 192, 456-471
Barucca L., Hering W., Perez Martin S., Bubelis E., Del Nevo A., Di Prinzio M., Caramello M., D’Alessandro A., Tarallo A., Vallone E., Moscato I., Quartararo A., D’amico S., Giannetti F., Lorusso P., Narcisi V., Ciurluini C., Montes Pita M.J., Sánchez C., Rovira A., Santana D., Gonzales P., Barbero R., Zaupa M., Szogradi M., Normann S., Vaananen M., Ylatalo J., Lewandowska M., Malinowski L., Martelli E., Froio A., Arena P., Tincani A., Maturation of critical technologies for the DEMO balance of plant systems, (2022) Fusion Engineering and Design, 179, art. no. 113096
González-Gómez P.A., Gómez-Hernández J., Ruiz C., Santana D., Can solar tower plants withstand the operational flexibility of combined cycle plants?, (2022) Applied Energy, 314, art. no. 118951
Pongratz G., Subotić V., von Berg L., Schroettner H., Hochenauer C., Martini S., Hauck M., Steinruecken B., Skrzypkiewicz M., Kupecki J., Scharler R., Anca-Couce A., Real coupling of solid oxide fuel cells with a biomass steam gasifier: Operating boundaries considering performance, tar and carbon deposition analyses, (2022) Fuel, 316, art. no. 123310
Shirmohammadi R., Aslani A., Ghasempour R., Romeo L.M., Petrakopoulou F., Exergoenvironmental analysis and thermoeconomic optimization of an industrial post-combustion CO2capture and utilization installation, (2022) Journal of CO2 Utilization, 59, art. no. 101927
Guil‐pedrosa J.F., García‐gutiérrez L.M., Cano‐pleite E., Soria‐verdugo A., Design of Novel Cooling Systems Based on Metal Plates with Channels of Shapes Inspired by Nature, (2022) Applied Sciences (Switzerland), 12-7, art. no. 3350
Pongratz G., Subotić V., Hochenauer C., Scharler R., Anca-Couce A., Solid oxide fuel cell operation with biomass gasification product gases: Performance- and carbon deposition risk evaluation via a CFD modelling approach, (2022) Energy, 244, art. no. 123085
Cano-Pleite E., Fernández-Torrijos M., Santana D., Acosta-Iborra A., Heat generation depth and temperature distribution in solar receiver tubes subjected to induction, (2022) Applied Thermal Engineering, 204, art. no. 117902
Barrera E.E., Medina A., Díaz-Barriga L.G., Zacarías A., Rubio J.J., Gutiérrez G.L., Cruz J.M., De Vega M., García N., Venegas M., Article Performance Assessment of Low-Temperature Solar Collector with Fullerenes C60 Manufactured at Low Cost in an Emerging Country, (2022) Applied Sciences (Switzerland), 12-6, art. no. 3161
Taramona S., González-Gómez P.Á., Briongos J.V., Gómez-Hernández J., Designing a flat beam-down linear Fresnel reflector, (2022) Renewable Energy, 187, 484-499
Rodríguez-Sánchez M.R., Laporte-Azcué M., Montoya A., Hernández-Jiménez F., Non-conventional tube shapes for lifetime extend of solar external receivers, (2022) Renewable Energy, 186, 535-546
Rasam S., Azizi K., Moraveji M.K., Akbari A., Soria-Verdugo A., Insights into the co–pyrolysis of olive stone, waste polyvinyl chloride and Spirulina microalgae blends through thermogravimetric analysis, (2022) Algal Research, 62, art. no. 102635
Christen C.E., Gómez-Hernández J., Otanicar T.P., Bimodal particle distributions with increased thermal conductivity for solid particles as heat transfer media and storage materials, (2022) International Journal of Heat and Mass Transfer, 184, art. no. 122250
Fernández-Torrijos M., Marugán-Cruz C., Sobrino C., Santana D., The water cost effect of hybrid-parallel condensing systems in the thermo-economical performance of solar tower plants, (2022) Applied Thermal Engineering, 202, art. no. 117801
González-Gómez P.A., Laporte-Azcué M., Fernández-Torrijos M., Santana D., Hybrid storage solution steam-accumulator combined to concrete-block to save energy during startups of combined cycles, (2022) Energy Conversion and Management, 253, art. no. 115168
González Martínez M., Anca Couce A., Dupont C., da Silva Perez D., Thiéry S., Meyer X.-M., Gourdon C., Torrefaction of cellulose, hemicelluloses and lignin extracted from woody and agricultural biomass in TGA-GC/MS: Linking production profiles of volatile species to biomass type and macromolecular composition, (2022) Industrial Crops and Products, 176, art. no. 114350
Laporte-Azcué M., González-Gómez P.A., Rodríguez-Sánchez M.R., Santana D., A procedure to predict solar receiver damage during transient conditions, (2022) Renewable and Sustainable Energy Reviews, 154, art. no. 111905
Zachl A., Buchmayr M., Gruber J., Anca-Couce A., Scharler R., Hochenauer C., Evaluation and extension of the load and fuel flexibility limits of a stratified downdraft gasifier, (2022) Energy, 239, art. no. 122279
Calise F., Cappiello F.L., Dentice d’Accadia M., Petrakopoulou F., Vicidomini M., A solar-driven 5th generation district heating and cooling network with ground-source heat pumps: a thermo-economic analysis, (2022) Sustainable Cities and Society, 76, art. no. 103438
2021
Cano‐pleite, E., Barrado, A., Garcia‐hernando, N., Olías, E., Soria‐verdugo, A., Numerical and experimental evaluation and heat transfer characteristics of a soft magnetic transformer built from laminated steel plates, (2021) Sensors, 21 (23), art. no. 7939,
Petrakopoulou, F., Batuecas, E., Introduction to an exergy-based socioeconomic analysis, (2021) Energy Conversion and Management, 249, art. no. 114853,
Köhler, A., Cano-Pleite, E., Soria-Verdugo, A., Pallarès, D., Johnsson, F.Modeling the motion of fuel particles in a fluidized bed (2021) Fuel, 305, art. no. 121424,
Mongili, B., Abdel Azim, A., Fraterrigo Garofalo, S., Batuecas, E., Re, A., Bocchini, S., Fino, D.´Novel insights in dimethyl carbonate-based extraction of polyhydroxybutyrate (PHB), (2021) Biotechnology for Biofuels, 14 (1), art. no. 13,
De León-Ruiz, J.E., Carvajal-Mariscal, I., Zacarías, A., Venegas, M., Performance of a shallow solar pond coupled with a heat pump cycle for thermal energy in net zero-energy buildings, (2021) Applied Thermal Engineering, 199, art. no. 117601,
Palma, K.R.D., Tomaz, E., Soria-Verdugo, A., Silva, M.A., The influence of the elemental and structural chemical composition on the ash fusibility of sugarcane bagasse and sugarcane straw, (2021) Fuel, 304, art. no. 121404,
Shirmohammadi, R., Aslani, A., Ghasempour, R., Romeo, L.M., Petrakopoulou, F., Techno-economic assessment and optimization of a solar-assisted industrial post-combustion CO2 capture and utilization plant, (2021) Energy Reports, 7, pp. 7390-7404.
Laporte-Azcué, M., Rodríguez-Sánchez, M.R., González-Gómez, P.A., Santana, D., Assessment of the time resolution used to estimate the central solar receiver lifetime, (2021) Applied Energy, 301, art. no. 117451,
Serrano-Arrabal, J., Serrano-Aguilera, J.J., Sánchez-González, A., Dual-tower CSP plants: optical assessment and optimization with a novel cone-tracing model, (2021) Renewable Energy, 178, pp. 429-442.
Fernández-Torrijos, M., González-Gómez, P.A., Sobrino, C., Santana, D., Economic and thermo-mechanical design of tubular sCO2 central-receivers, (2021) Renewable Energy, 177, pp. 1087-1101.
Briongos, J.V., Taramona, S., Gómez-Hernández, J., Mulone, V., Santana, D., Solar and biomass hybridization through hydrothermal carbonization, (2021) Renewable Energy, 177, pp. 268-279.
Petrakopoulou, F., Defining the cost of water impact for thermoelectric power generation, (2021) Energy Reports, 7, pp. 2101-2112.
Batuecas, E., Ramón-Álvarez, I., Sánchez-Delgado, S., Torres-Carrasco, M., Carbon footprint and water use of alkali-activated and hybrid cement mortars, (2021) Journal of Cleaner Production, 319, art. no. 128653,
De La Rocha Camba, E., Petrakopoulou, F., Economic analysis of a zero-water solar power plant for energy security, (2021) Applied Sciences (Switzerland), 11 (20), art. no. 9639,
Sefiddashti, A.R., Shirmohammadi, R., Petrakopoulou, F., Efficiency enhancement of gas turbine systems with air injection driven by natural gas turboexpanders, (2021) Sustainability (Switzerland), 13 (19), art. no. 994,
Córcoles, J.I., Acosta-Iborra, A., Almendros-Ibáñez, J.A., Sobrino, C., Numerical simulation of a 3-D gas-solid fluidized bed: Comparison of TFM and CPFD numerical approaches and experimental validation, (2021) Advanced Powder Technology, 32 (10), pp. 3689-3705.
Laporte-Azcué, M., González-Gómez, P.A., Rodríguez-Sánchez, M.R., Santana, D., Material selection for solar central receiver tubes, (2021) Solar Energy Materials and Solar Cells, 231, art. no. 111317,
Córcoles, J.I., Acosta-Iborra, A., Almendros-Ibáñez, J.A., Influence of immersed surface shape on the heat transfer process and flow pattern in a fluidized bed using numerical simulation., (2021) International Journal of Heat and Mass Transfer, 178, art. no. 121621,
Nasrollahi, H., Safaei Boroujeni, R., Shirmohammadi, R., Najafi Nobar, S., Aslani, A., Amidpour, M., Petrakopoulou, F., Optimization of water pressure of a distribution network within the water–energy Nexus, (2021) Applied Sciences (Switzerland), 11 (18), art. no. 8371,
Kwapinska, M., Horvat, A., Agar, D.A., Leahy, J.J., Energy recovery through co-pyrolysis of wastewater sludge and forest residues – The transition from laboratory to pilot scale´(2021) Journal of Analytical and Applied Pyrolysis, 158, art. no. 105283,
Pérez-Álvarez, R., González-Gómez, P.Á., Acosta-Iborra, A., Santana, D., Thermal stress and fatigue damage of central receiver tubes during their preheating, (2021) Applied Thermal Engineering, 195, art. no. 117115,
Shirmohammadi, R., Aslani, A., Ghasempour, R., Romeo, L.M., Petrakopoulou, F., Process design and thermoeconomic evaluation of a CO2 liquefaction process driven by waste exhaust heat recovery for an industrial CO2 capture and utilization plant, (2021) Journal of Thermal Analysis and Calorimetry, 145 (3), pp. 1585-1597.
Guzmán, H., Salomone, F., Batuecas, E., Tommasi, T., Russo, N., Bensaid, S., Hernández, S., How to make sustainable CO2 conversion to Methanol: Thermocatalytic versus electrocatalytic technology, (2021) Chemical Engineering Journal, 417, art. no. 127973,
Batuecas, E., Contreras-Lisperguer, R., Mayo, C., Díaz, R., Springer, C., Pérez, F.J., Jamaican bioethanol: an environmental and economic life cycle assessment (2021) Clean Technologies and Environmental Policy, 23 (5), pp. 1415-1430.
Horvat, A., Kwapinska, M., Abdel Karim Aramouni, N., Leahy, J.J. Solid phase adsorption method for tar sampling – How post sampling treatment affects tar yields and volatile tar compounds?, (2021) Fuel, 291, art. no. 120059, .
Cano-Pleite, E., Rubio-Rubio, M., Riedel, U., Soria-Verdugo, A., Evaluation of the number of first-order reactions required to accurately model biomass pyrolysis, (2021) Chemical Engineering Journal, 408, art. no. 127291, .
Batuecas, E., Liendo, F., Tommasi, T., Bensaid, S., Deorsola, F.A., Fino, D., Recycling CO2from flue gas for CaCO3nanoparticles production as cement filler: A Life Cycle Assessment, (2021) Journal of CO2 Utilization, 45, art. no. 101446, .
Cano-Pleite, E., Hernández-Jiménez, F., Acosta-Iborra, A., Vibration augmentation of the solids volume dragged by the wake of a bubble rising in a fluidized bed, (2021) Powder Technology, 380, pp. 574-583.
Rasam, S., Keshavarz Moraveji, M., Soria-Verdugo, A., Salimi, A., Synthesis, characterization and absorbability of Crocus sativus petals hydrothermal carbonized hydrochar and activated hydrochar, (2021) Chemical Engineering and Processing – Process Intensification, 159, art. no. 108236, .
Sun, J., Guo, X., Wang, H., Hernández Jiménez, F., Huang, Z., Fan, X., Yang, Y., Wang, J., Yang, Y., Hydrodynamics and heat transfer in a fluidized bed with liquid spray: Particle color-change based measurement and modelling, (2021) Chemical Engineering Science, 229, art. no. 116088, .
González-Gómez, P.A., Rodríguez-Sánchez, M.R., Laporte-Azcué, M., Santana, D., Calculating molten-salt central-receiver lifetime under creep-fatigue damage, (2021) Solar Energy, 213, pp. 180-197.
2020
Sánchez-González A., Rodríguez-Sánchez M.R., Santana D., Allowable solar flux densities for molten-salt receivers: Input to the aiming strategy (2020) Results in Engineering, 5, art. no. 100074, .
Sánchez-González A., Gómez-Hernández J., Beam-down linear Fresnel reflector: BDLFR (2020) Renewable Energy, 146, pp. 802-815.
Zacarías A., Quiroz J.A., Gutiérrez-Urueta G.L., Venegas M., Carvajal I., Rubio J., Comparison between adiabatic and nonadiabatic absorption chillers using ammonia–lithium nitrate and water–lithium bromide solutions (2020) Heat Transfer Research, 51 (7), pp. 609-621.
Soria-Verdugo A., Morgano M.T., Mätzing H., Goos E., Leibold H., Merz D., Riedel U., Stapf D., Comparison of wood pyrolysis kinetic data derived from thermogravimetric experiments by model-fitting and model-free methods (2020) Energy Conversion and Management, 212, art. no. 112818, .
Sharifi S., Nozad Heravi F., Shirmohammadi R., Ghasempour R., Petrakopoulou F., Romeo L.M., Comprehensive thermodynamic and operational optimization of a solar-assisted LiBr/water absorption refrigeration system (2020) Energy Reports, 6, pp. 2309-2323.
Laporte-Azcué M., González-Gómez P.A., Rodríguez-Sánchez M.R., Santana D., Deflection and stresses in solar central receivers (2020) Solar Energy, 195, pp. 355-368.
de la Rocha Camba E., Petrakopoulou F., Earth-cooling air tunnels for thermal power plants: Initial design by CFD modelling (2020) Energies, 13 (4) , art. no. 797, .
Hilo A.K., Abu Talib A.R., Acosta Iborra A., Hameed Sultan M.T., Abdul Hamid M.F., Effect of corrugated wall combined with backward-facing step channel on fluid flow and heat transfer (2020) Energy, 190, art. no. 116294, .
Ruiz-Rivas U., Martinez-Crespo J., Venegas M., Chinchilla-Sanchez M., Energy engineering curricula for sustainable development, considering underserved areas (2020) Journal of Cleaner Production, 258, art. no. 120960, .
von Berg L., Soria-Verdugo A., Hochenauer C., Scharler R., Anca-Couce A., Evaluation of heat transfer models at various fluidization velocities for biomass pyrolysis conducted in a bubbling fluidized bed (2020) International Journal of Heat and Mass Transfer, 160, art. no. 120175, .
Cano-Pleite E., Rubio-Rubio M., Riedel U., Soria-Verdugo A., Evaluation of the number of first-order reactions required to accurately model biomass pyrolysis (2020) Chemical Engineering Journal, , art. no. 127291, .
Manesh M.H.K., Kabiri S., Yazdi M., Petrakopoulou F., Exergoeconomic modeling and evaluation of a combined-cycle plant with msf and med desalination (2020) Journal of Water Reuse and Desalination, 10 (2), pp. 158-172.
Laporte-Azcué M., González-Gómez P.A., Rodríguez-Sánchez M.R., Santana D., Exergy analysis of solar central receivers (2020) Solar Energy, 207, pp. 957-973.
Fernández-Torrijos M., Sobrino C., Marugán-Cruz C., Santana D., Experimental and numerical study of the heat transfer process during the startup of molten salt tower receivers (2020) Applied Thermal Engineering, 178, art. no. 115528, .
Venegas M., García-Hernando N., de Vega M., Experimental evaluation of a membrane-based microchannel desorber operating at low desorption temperatures (2020) Applied Thermal Engineering, 167, art. no. 114781, .
Garcia-Gutierrez L.M., Hernández-Jiménez F., Cano-Pleite E., Soria-Verdugo A., Experimental evaluation of the convection heat transfer coefficient of large particles moving freely in a fluidized bed reactor (2020) International Journal of Heat and Mass Transfer, 153, art. no. 119612, .
Katsaros G., Pandey D.S., Horvat A., Aranda Almansa G., Fryda L.E., Leahy J.J., Tassou S.A., Experimental investigation of poultry litter gasification and co-gasification with beech wood in a bubbling fluidised bed reactor – Effect of equivalence ratio on process performance and tar evolution (2020) Fuel, 262, art. no. 116660, .
de Vega M., García-Hernando N., Venegas M., Experimental performance of membrane water absorption in LiBr solution with and without cooling (2020) Applied Thermal Engineering, 180, art. no. 115786, .
Wang H., Soria Verdugo A., Sun J., Wang J., Yang Y., Hernández Jiménez F., Experimental study of bubble dynamics and flow transition recognition in a fluidized bed with wet particles (2020) Chemical Engineering Science, 211, art. no. 115257, .
Petrakopoulou F., Robinson A., Olmeda-Delgado M., Impact of climate change on fossil fuel power-plant efficiency and water use (2020) Journal of Cleaner Production, 273, art. no. 122816, .
Batuecas E., Mayo C., Díaz R., Pérez F.J., Influence of elemental composition in environmental impacts of steel (2020) Journal of Iron and Steel Research International, 27 (5), pp. 598-607.
Montoya A., Rodríguez-Sánchez M.R., López-Puente J., Santana D., Influence of longitudinal clips in thermal stresses and deflection in solar tubular receivers (2020) Solar Energy, 198, pp. 224-238.
Cano-Pleite E., Rubio-Rubio M., García-Hernando N., Soria-Verdugo A., Microalgae pyrolysis under isothermal and non-isothermal conditions (2020) Algal Research, 51, art. no. 102031, .
Romage G., Jiménez C., Reyes J.J., Zacarías A., Carvajal I., Jiménez J.A., Pineda J., Venegas M., Modeling and simulation of a hybrid compression/absorption chiller driven by stirling engine and solar dish collector (2020) Applied Sciences (Switzerland), 10 (24) , art. no. 9018, pp. 1-18.
Pérez-Álvarez R., Acosta-Iborra A., Santana D., Multiresolution analysis of the thermal stresses in an absorber bayonet tube for SPT receivers (2020) AIP Conference Proceedings, 2303, art. no. 29571, .
Soria-Verdugo A., Rubio-Rubio M., Goos E., Riedel U., On the characteristic heating and pyrolysis time of thermally small biomass particles in a bubbling fluidized bed reactor (2020) Renewable Energy, 160, pp. 312-322.
Yang H., Li J., Wang Q., Wu L., Reyes Rodríguez-Sanchez M., Santana D., Pei G., Performance investigation of solar tower system using cascade supercritical carbon dioxide Brayton-steam Rankine cycle (2020) Energy Conversion and Management, 225, art. no. 113430, .
Venegas M., García-Hernando N., Zacarías A., de Vega M., Performance of a solar absorption cooling system using nanofluids and a membrane-based microchannel desorber (2020) Applied Sciences (Switzerland), 10 (8) , art. no. 2761, .
Kwapinska M., Horvat A., Liu Y., Leahy J.J., Pilot Scale Pyrolysis of Activated Sludge Waste from Milk Processing Factory (2020) Waste and Biomass Valorization, 11 (6), pp. 2887-2903.
Soria-Verdugo A., Kauppinen J., Soini T., García-Gutiérrez L.M., Pikkarainen T., Pollutant emissions released during sewage sludge combustion in a bubbling fluidized bed reactor (2020) Waste Management, 105, pp. 27-38.
Serrano D., Golpour I., Sánchez-Delgado S., Predicting the effect of bed materials in bubbling fluidized bed gasification using artificial neural networks (ANNs) modeling approach (2020) Fuel, 266, art. no. 117021, .
Sánchez-González A., Yellowhair J., Reflections between heliostats: Model to detect alignment errors (2020) Solar Energy, 201, pp. 373-386.
Guardiola J., Elvira R., Briongos J.V., Superficial oscillation as an identifier of phenomena governing dynamics of solid–gas fluidized systems (2020) Powder Technology, 362, pp. 770-780.
Ortiz D.L., Batuecas E., Orrego C.E., Rodríguez L.J., Camelin E., Fino D., Sustainable management of peel waste in the small-scale orange juice industries: A Colombian case study (2020) Journal of Cleaner Production, 265, art. no. 121587, .
Rasam S., Keshavarz Moraveji M., Soria-Verdugo A., Salimi A., Synthesis, characterization and absorbability of Crocus sativus petals hydrothermal carbonized hydrochar and activated hydrochar (2020) Chemical Engineering and Processing – Process Intensification, , art. no. 108236, .
Serrano D., Castelló D., Tar prediction in bubbling fluidized bed gasification through artificial neural networks (2020) Chemical Engineering Journal, 402, art. no. 126229, .
Gómez-Hernández J., González-Gómez P.A., Briongos J.V., Santana D., Technical feasibility analysis of a linear particle solar receiver (2020) Solar Energy, 195, pp. 102-113.
Pérez-Álvarez R., Acosta-Iborra A., Santana D., Thermal and mechanical stresses in bayonet tubes of solar central receivers working with molten salt and liquid sodium (2020) Results in Engineering, 5, art. no. 100073, .
Rasam S., Moshfegh Haghighi A., Azizi K., Soria-Verdugo A., Keshavarz Moraveji M., Thermal behavior, thermodynamics and kinetics of co-pyrolysis of binary and ternary mixtures of biomass through thermogravimetric analysis (2020) Fuel, 280, art. no. 118665, .
Khoshgoftar Manesh M.H., Kabiri S., Yazdi M., Petrakopoulou F., Thermodynamic evaluation of a combined-cycle power plant with MSF and MED desalination (2020) Journal of Water Reuse and Desalination, 10 (2), pp. 146-157.
Marugán-Cruz C., Sánchez-Delgado S., Gómez-Hernández J., Santana D., Towards zero water consumption in solar tower power plants (2020) Applied Thermal Engineering, 178, art. no. 115505,.
Calise F., Cappiello F.L., Vicidomini M., Petrakopoulou-Robinson F., Water-energy nexus: A thermoeconomic analysis of polygeneration systems for small Mediterranean islands (2020) Energy Conversion and Management, 220, art. no. 113043, .
2019
Katsaros, G., Pandey, D.S., Horvat, A., Almansa, G.A., Fryda, L.E., Leahy, J.J., Tassou, S.A., Gasification of poultry litter in a lab-scale bubbling fluidised bed reactor: Impact of process parameters on gasifier performance and special focus on tar evolution (2019) Waste Management, 100, pp. 336-345.
Kwapinska, M., Horvat, A., Liu, Y., Leahy, J.J., Pilot Scale Pyrolysis of Activated Sludge Waste from Milk Processing Factory (2019) Waste and Biomass Valorization, .
Petrakopoulou, F., Olmeda-Delgado, M., Studying the reduction of water use in integrated solar combined-cycle plants (2019) Sustainability (Switzerland), 11 (7), art. no. 2085, .
Almendros-Ibáñez, J.A., Fernández-Torrijos, M., Díaz-Heras, M., Belmonte, J.F., Sobrino, C., A review of solar thermal energy storage in beds of particles: Packed and fluidized beds (2019) Solar Energy, 192, pp. 193-237.
Horvat, A., Pandey, D.S., Kwapinska, M., Mello, B.B., Gómez-Barea, A., Fryda, L.E., Rabou, L.P.L.M., Kwapinski, W., Leahy, J.J., Tar yield and composition from poultry litter gasification in a fluidised bed reactor: Effects of equivalence ratio, temperature and limestone addition (2019) RSC Advances, 9 (23), pp. 13283-13296.
Rodríguez-Sánchez, M.R., Leray, C., Toutant, A., Ferriere, A., Olalde, G., Development of a new method to estimate the incident solar flux on central receivers from deteriorated heliostats (2019) Renewable Energy, 130, pp. 182-190.
Rodríguez-Sánchez, M.R., Sánchez-González, A., Santana, D., Field-receiver model validation against Solar Two tests (2019) Renewable and Sustainable Energy Reviews, 110, pp. 43-52.
Hernández-Jiménez, F., Garcia-Gutierrez, L.M., Acosta-Iborra, A., Soria-Verdugo, A., Numerical study of the effect of pressure and temperature on the fluidization of solids with air and (supercritical) CO 2 (2019) Journal of Supercritical Fluids, 147, pp. 271-283.
Batuecas, E., Mayo, C., Díaz, R., Pérez, F.J., Influence of elemental composition in environmental impacts of steel (2019) Journal of Iron and Steel Research International, .
Batuecas, E., Tommasi, T., Battista, F., Negro, V., Sonetti, G., Viotti, P., Fino, D., Mancini, G., Life Cycle Assessment of waste disposal from olive oil production: Anaerobic digestion and conventional disposal on soil (2019) Journal of Environmental Management, 237, pp. 94-102.
Fernández-Torrijos, M., Sobrino, C., Almendros-Ibáñez, J.A., Marugán-Cruz, C., Santana, D., Inverse heat problem of determining unknown surface heat flux in a molten salt loop (2019) International Journal of Heat and Mass Transfer, 139, pp. 503-516.
Campo, A., Acosta-Iborra, A., Corrected quasi one-dimensional heat conduction equation for the analysis of straight fins of uniform profile (2019) Heat and Mass Transfer/Waerme- und Stoffuebertragung, 55 (4), pp. 1023-1031.
Marugán-Cruz, C., Serrano, D., Gómez-Hernández, J., Sánchez-Delgado, S., Solar multiple optimization of a DSG linear Fresnel power plant (2019) Energy Conversion and Management, 184, pp. 571-580.
Rodríguez Hervás, G., Petrakopoulou, F., Exergoeconomic Analysis of the Allam Cycle (2019) Energy and Fuels, 33 (8), pp. 7561-7568.
De Palma, K.R., García-Hernando, N., Silva, M.A., Tomaz, E., Soria-Verdugo, A., Pyrolysis and Combustion Kinetic Study and Complementary Study of Ash Fusibility Behavior of Sugarcane Bagasse, Sugarcane Straw, and Their Pellets – Case Study of Agro-Industrial Residues (2019) Energy and Fuels, 33 (4), pp. 3227-3238.
Fernández-Gil, G., Petrakopoulou, F., Sustainable water generation on a mediterranean island in Greece (2019) Energies, 12 (22), art. no. 4247, .
Sánchez-Delgado, S., Marugán-Cruz, C., Serrano, D., Briongos, J.V., Distributor performance in a bubbling fluidized bed: Effects of multiple gas inlet jet and bubble generation (2019) Chemical Engineering Science, 195, pp. 367-380.
González-Gómez, P.A., Gómez-Hernández, J., Briongos, J.V., Santana, D., Lifetime analysis of the steam generator of a solar tower plant (2019) Applied Thermal Engineering, 159, art. no. 113805, .
Serrano, D., Horvat, A., Sobrino, C., Sánchez-Delgado, S., Thermochemical conversion of C. cardunculus L. in nitrate molten salts (2019) Applied Thermal Engineering, 148, pp. 136-146.
González-Gómez, P.A., Gómez-Hernández, J., Ferruzza, D., Haglind, F., Santana, D., Dynamic performance and stress analysis of the steam generator of parabolic trough solar power plants (2019) Applied Thermal Engineering, 147, pp. 804-818.
Hernández-Jiménez, F., Soria-Verdugo, A., Acosta-Iborra, A., Santana, D., Exergy recovery from solar heated particles to supercritical CO2 (2019) Applied Thermal Engineering, 146, pp. 469-481.
Serrano-Sanchez, C., Olmeda-Delgado, M., Petrakopoulou, F., Exergy and economic evaluation of a hybrid power plant coupling coal with solar energy (2019) Applied Sciences (Switzerland), 9 (5), art. no. 850, .
del Moral, A., Petrakopoulou, F., Evaluation of the coupling of a hybrid power plant with a water generation system (2019) Applied Sciences (Switzerland), 9 (23), art. no. 4989, .
2018
Encinas-Sánchez, V., Batuecas, E., Macías-García, A., Mayo, C., Díaz, R., Pérez, F.J., Corrosion resistance of protective coatings against molten nitrate salts for thermal energy storage and their environmental impact in CSP technology (2018) Solar Energy, 176, pp. 688-697.
Montoya, A., Rodríguez-Sánchez, M.R., López-Puente, J., Santana, D., Numerical model of solar external receiver tubes: Influence of mechanical boundary conditions and temperature variation in thermoelastic stresses (2018) Solar Energy, 174, pp. 912-922.
Briongos, J.V., Gómez-Hernández, J., González-Gómez, P.A., Serrano, D., Two-phase heat transfer model of a beam-down gas-solid fluidized bed solar particle receiver (2018) Solar Energy, 171, pp. 740-750.
Rodríguez-Sánchez, M.R., Marugán-Cruz, C., Acosta-Iborra, A., Santana, D., Thermo-mechanical modelling of solar central receivers: Effect of incident solar flux resolution (2018) Solar Energy, 165, pp. 43-54.
Mayo, C., Batuecas, E., Díaz, R., Pérez, F.J., Comparative environmental assessment of two materials suited to central tower CSP technology (2018) Solar Energy, 162, pp. 178-186.
Contreras-Lisperguer, R., Batuecas, E., Mayo, C., Díaz, R., Pérez, F.J., Springer, C., Sustainability assessment of electricity cogeneration from sugarcane bagasse in Jamaica (2018) Journal of Cleaner Production, 200, pp. 390-401.
Kiravu, C., Diaz-Maurin, F., Giampietro, M., Brent, A.C., Bukkens, S.G.F., Chiguvare, Z., Gasennelwe-Jeffrey, M.A., Gope, G., Kovacic, Z., Magole, L., Musango, J.K., Ruiz-Rivas Hernando, U., Smit, S., Vázquez Barquero, A., Yunta Mezquita, F., Proposing a master’s programme on participatory integrated assessment of energy systems to promote energy access and energy efficiency in Southern Africa (2018) International Journal of Sustainability in Higher Education, 19 (3), pp. 622-641.
González-Gómez, P.A., Gómez-Hernández, J., Briongos, J.V., Santana, D., Fatigue analysis of the steam generator of a parabolic trough solar power plant (2018) Energy, 155, pp. 565-577.
Sánchez-González, A., Rodríguez-Sánchez, M.R., Santana, D., Aiming factor to flatten the flux distribution on cylindrical receivers (2018) Energy, 153, pp. 113-125.
Gómez-Hernández, J., González-Gómez, P.A., Briongos, J.V., Santana, D., Influence of the steam generator on the exergetic and exergoeconomic analysis of solar tower plants (2018) Energy, 145, pp. 313-328.
Serrano, D., Kwapinska, M., Sánchez-Delgado, S., Leahy, J.J., Fly Ash Characterization from Cynara cardunculus L. Gasification (2018) Energy and Fuels, 32 (5), pp. 5901-5909.
Wang, H., Hernández-Jiménez, F., Lungu, M., Huang, Z., Yang, Y., Wang, J., Yang, Y., Critical comparison of electrostatic effects on hydrodynamics and heat transfer in a bubbling fluidized bed with a central jet (2018) Chemical Engineering Science, 191, pp. 156-168.
Morato-Godino, A., Sánchez-Delgado, S., García-Hernando, N., Soria-Verdugo, A., Pyrolysis of Cynara cardunculus L. samples – Effect of operating conditions and bed stage on the evolution of the conversion (2018) Chemical Engineering Journal, 351, pp. 371-381.
Gómez-Hernández, J., González-Gómez, P.A., Briongos, J.V., Santana, D., Maximizing the power block efficiency of solar tower plants: Dual-pressure level steam generator (2018) Applied Thermal Engineering, 144, pp. 583-592.
Rodríguez-Sánchez, M.R., Sánchez-González, A., Santana, D., Feasibility study of a new concept of solar external receiver: Variable velocity receiver (2018) Applied Thermal Engineering, 128, pp. 335-344.
Fernández-Torrijos, M., Albrecht, K.J., Ho, C.K., Dynamic modeling of a particle/supercritical CO2 heat exchanger for transient analysis and control (2018) Applied Energy, 226, pp. 595-606.
González-Gómez, P.A., Gómez-Hernández, J., Briongos, J.V., Santana, D., Transient thermo-mechanical analysis of steam generators for solar tower plants (2018) Applied Energy, 212, pp. 1051-1068.
Soria-Verdugo, A., Goos, E., García-Hernando, N., Riedel, U., Analyzing the pyrolysis kinetics of several microalgae species by various differential and integral isoconversional kinetic methods and the Distributed Activation Energy Model (2018) Algal Research, 32, pp. 11-29.
2017
Petrakopoulou, F., The social perspective on the renewable energy autonomy of geographically isolated communities: Evidence from a Mediterranean island (2017) Sustainability (Switzerland), 9 (3), art. no. 327, .
Sánchez-González, A., Rodríguez-Sánchez, M.R., Santana, D., Aiming strategy model based on allowable flux densities for molten salt central receivers (2017) Solar Energy, 157, pp. 1130-1144.
Fernández-Torrijos, M., Sobrino, C., Almendros-Ibáñez, J.A., Simplified model of a dual-media molten-salt thermocline tank with a multiple layer wall (2017) Solar Energy, 151, pp. 146-161.
Sánchez-González, A., Caliot, C., Ferrière, A., Santana, D., Determination of heliostat canting errors via deterministic optimization (2017) Solar Energy, 150, pp. 136-146.
Batuecas, E., Mayo, C., Díaz, R., Pérez, F.J., Life Cycle Assessment of heat transfer fluids in parabolic trough concentrating solar power technology (2017) Solar Energy Materials and Solar Cells, 171, pp. 91-97.
Gómez-Hernández, J., Sánchez-Delgado, S., Wagner, E., Mudde, R.F., van Ommen, J.R., Characterization of TiO2 nanoparticles fluidization using X-ray imaging and pressure signals (2017) Powder Technology, 316, pp. 446-454.
Cano-Pleite, E., Hernández-Jiménez, F., Acosta-Iborra, A., Müller, C.R., Reversal of gulf stream circulation in a vertically vibrated triangular fluidized bed (2017) Powder Technology, 316, pp. 345-356.
Cano-Pleite, E., Hernández-Jiménez, F., Acosta-Iborra, A., Tsuji, T., Müller, C.R., Segregation of equal-sized particles of different densities in a vertically vibrated fluidized bed (2017) Powder Technology, 316, pp. 101-110.
Cano-Pleite, E., Hernández-Jiménez, F., Acosta-Iborra, A., Bulk oscillation and velocity wave propagation in a vibrated fluidized bed at minimum fluidization conditions (2017) Powder Technology, 308, pp. 346-361.
Salameh, S., Gómez-Hernández, J., Goulas, A., Van Bui, H., van Ommen, J.R., Advances in scalable gas-phase manufacturing and processing of nanostructured solids: A review (2017) Particuology, 30, pp. 15-39.
Lara, Y., Petrakopoulou, F., Morosuk, T., Boyano, A., Tsatsaronis, G., An exergy-based study on the relationship between costs and environmental impacts in power plants (2017) Energy, 138, pp. 920-928.
Venegas, M., de Vega, M., García-Hernando, N., Ruiz-Rivas, U., Adiabatic vs non-adiabatic membrane-based rectangular micro-absorbers for H2O-LiBr absorption chillers (2017) Energy, 134, pp. 757-766.
Cutz, L., Masera, O., Santana, D., Faaij, A.P.C., Switching to efficient technologies in traditional biomass intensive countries: The resultant change in emissions (2017) Energy, 126, pp. 513-526.
González-Gómez, P.A., Petrakopoulou, F., Briongos, J.V., Santana, D., Cost-based design optimization of the heat exchangers in a parabolic trough power plant (2017) Energy, 123, pp. 314-325.
Rodríguez-Sánchez, M.R., Sánchez-González, A., González-Gómez, P.A., Marugán-Cruz, C., Santana, D., Thermodynamic and economic assessment of a new generation of subcritical and supercritical solar power towers (2017) Energy, 118, pp. 534-544.
Petrakopoulou, F., Sánchez-Delgado, S., Marugán-Cruz, C., Santana, D., Improving the efficiency of gas turbine systems with volumetric solar receivers (2017) Energy Conversion and Management, 149, pp. 579-592.
González-Gómez, P.A., Gómez-Hernández, J., Briongos, J.V., Santana, D., Thermo-economic optimization of molten salt steam generators (2017) Energy Conversion and Management, 146, pp. 228-243.
Soria-Verdugo, A., Morato-Godino, A., Garcia-Gutierrez, L.M., Garcia-Hernando, N., Pyrolysis of sewage sludge in a fixed and a bubbling fluidized bed – Estimation and experimental validation of the pyrolysis time (2017) Energy Conversion and Management, 144, pp. 235-242.
Soria-Verdugo, A., Goos, E., Morato-Godino, A., García-Hernando, N., Riedel, U., Pyrolysis of biofuels of the future: Sewage sludge and microalgae – Thermogravimetric analysis and modelling of the pyrolysis under different temperature conditions (2017) Energy Conversion and Management, 138, pp. 261-272.
Cano-Pleite, E., Hernández-Jiménez, F., Garcia-Gutierrez, L.M., Acosta-Iborra, A., Experimental study on the motion of solids around an isolated bubble rising in a vertically vibrated fluidized bed (2017) Chemical Engineering Journal, 330, pp. 120-133.
Serrano, D., Sánchez-Delgado, S., Horvat, A., Effect of sepiolite bed material on gas composition and tar mitigation during C. cardunculus L. gasification (2017) Chemical Engineering Journal, 317, pp. 1037-1046.
Cano-Pleite, E., Hernández-Jiménez, F., Acosta-Iborra, A., Mawatari, Y., Oscillatory behavior of the bed bulk and the bubbles in a vertically vibrated pseudo-2D bed in bubbling regime (2017) Chemical Engineering Journal, 312, pp. 228-242.
2016
Rodriguez-Sanchez, M.R., Santana, D., Olalde, G., Experimental study of honeycomb SiCSi under highly concentrated solar flux: Evolution of its thermo-radiative properties (2016) Solar Energy Materials and Solar Cells, 155, pp. 253-263.
Petrakopoulou, F., Robinson, A., Loizidou, M., Simulation and evaluation of a hybrid concentrating-solar and wind power plant for energy autonomy on islands (2016) Renewable Energy, 96, pp. 863-871.
Cutz, L., Haro, P., Santana, D., Johnsson, F., Assessment of biomass energy sources and technologies: The case of Central America (2016) Renewable and Sustainable Energy Reviews, 58, pp. 1411-1431.
Gómez-Hernández, J., Ruud van Ommen, J., Wagner, E., Mudde, R.F., A fast reconstruction algorithm for time-resolved X-ray tomography in bubbling fluidized beds (2016) Powder Technology, 290, pp. 33-44.
Li, T., Zhang, Y., Hernández-Jiménez, F., Investigation of particle-wall interaction in a pseudo-2D fluidized bed using CFD-DEM simulations (2016) Particuology, 25, pp. 10-22.
Blanco-Cano, L., Soria-Verdugo, A., Garcia-Gutierrez, L.M., Ruiz-Rivas, U., Evaluation of the Maximum Evaporation Rate in Small-Scale Indirect Solar Dryers (2016) Journal of Solar Energy Engineering, Transactions of the ASME, 138 (2), art. no. 024502, .
Izquierdo-Barrientos, M.A., Sobrino, C., Almendros-Ibáñez, J.A., Modeling the Heat Transfer Coefficient between a Surface and Fixed and Fluidized Beds with Phase Change Material (2016) Journal of Heat Transfer, 138 (7), art. no. 072001, .
Petrakopoulou, F., Robinson, A., Loizidou, M., Erratum: Exergetic analysis and dynamic simulation of a solar-wind power plant with electricity storage and hydrogen generation (Journal of Cleaner Production (2016) 113 (450-458)) (2016) Journal of Cleaner Production, 129, p. 143.
Petrakopoulou, F., Robinson, A., Loizidou, M., Exergetic analysis and dynamic simulation of a solar-wind power plant with electricity storage and hydrogen generation (2016) Journal of Cleaner Production, 113, pp. 450-458.
Venegas, M., de Vega, M., García-Hernando, N., Ruiz-Rivas, U., Simplified model of a membrane-based rectangular micro-desorber for absorption chillers [Modèle simplifié d’un micro-désorbeur rectangulaire à base de membrane pour les refroidisseurs à absorption] (2016) International Journal of Refrigeration, 71, pp. 108-123.
Izquierdo-Barrientos, M.A., Sobrino, C., Almendros-Ibáñez, J.A., Modeling and experiments of energy storage in a packed bed with PCM (2016) International Journal of Multiphase Flow, 86, pp. 1-9.
Marugán-Cruz, C., Flores, O., Santana, D., García-Villalba, M., Heat transfer and thermal stresses in a circular tube with a non-uniform heat flux (2016) International Journal of Heat and Mass Transfer, 96, pp. 256-266.
Martin, R.D., Trujillo, F.J.P., Martin, T.G., Del Río, C.M., Fernandez, E.B., Mouhaffel, A.G., Mayoral, J.R., Cycle life assessment PVC from procurement public buildings (2016) International Journal of Applied Engineering Research, 11 (6), pp. 4252-4257.
Díaz Martín, R., Pérez Trujillo, F.J., Morales García, J.F., Mayo del Río, C., Batuecas Fernández, E., Guardiola Mouhaffel, A., Evaluation of the environmental benefits of recycling materials in the moving parts of a wind turbine using the life cycle assessment (LCA) (2016) International Journal of Applied Engineering Research, 11 (5), pp. 2990-2995.
Serrano, D., Kwapinska, M., Horvat, A., Sánchez-Delgado, S., Leahy, J.J., Cynara cardunculus L. gasification in a bubbling fluidized bed: The effect of magnesite and olivine on product gas, tar and gasification performance (2016) Fuel, 173, pp. 247-259.
Petrakopoulou, F., Robinson, A., Loizidou, M., Simulation and analysis of a stand-alone solar-wind and pumped-storage hydropower plant (2016) Energy, 96, pp. 676-683.
Venegas, M., de Vega, M., García-Hernando, N., Ruiz-Rivas, U., A simple model to predict the performance of a H2O-LiBr absorber operating with a microporous membrane (2016) Energy, 96, pp. 383-393.
Petrakopoulou, F., Sanz-Bermejo, J., Dufour, J., Romero, M., Exergetic analysis of hybrid power plants with biomass and photovoltaics coupled with a solid-oxide electrolysis system (2016) Energy, 94, pp. 304-315.
Petrakopoulou, F., On the economics of stand-alone renewable hybrid power plants in remote regions (2016) Energy Conversion and Management, 118, pp. 63-74.
Soria-Verdugo, A., Goos, E., Arrieta-Sanagustín, J., García-Hernando, N., Modeling of the pyrolysis of biomass under parabolic and exponential temperature increases using the Distributed Activation Energy Model (2016) Energy Conversion and Management, 118, pp. 223-230.
Horvat, A., Kwapinska, M., Xue, G., Rabou, L.P.L.M., Pandey, D.S., Kwapinski, W., Leahy, J.J., Tars from Fluidized Bed Gasification of Raw and Torrefied Miscanthus x giganteus (2016) Energy and Fuels, 30 (7), pp. 5693-5704.
Pandey, D.S., Kwapinska, M., Gómez-Barea, A., Horvat, A., Fryda, L.E., Rabou, L.P.L.M., Leahy, J.J., Kwapinski, W., Poultry Litter Gasification in a Fluidized Bed Reactor: Effects of Gasifying Agent and Limestone Addition (2016) Energy and Fuels, 30 (4), pp. 3085-3096.
Horvat, A., Kwapinska, M., Xue, G., Dooley, S., Kwapinski, W., Leahy, J.J., Detailed Measurement Uncertainty Analysis of Solid-Phase Adsorption-Total Gas Chromatography (GC)-Detectable Tar from Biomass Gasification (2016) Energy and Fuels, 30 (3), pp. 2187-2197.
Belmonte, J.F., Izquierdo-Barrientos, M.A., Molina, A.E., Almendros-Ibáñez, J.A., Air-based solar systems for building heating with PCM fluidized bed energy storage (2016) Energy and Buildings, 130, pp. 150-165.
Gómez-Hernández, J., Soria-Verdugo, A., Briongos, J.V., Santana, D., Multiresolution Analysis of a Drying Process in a Rotating-Distributor Fluidized Bed (2016) Drying Technology, 34 (1), pp. 119-131.
Cano-Pleite, E., Shimizu, Y., Acosta-Iborra, A., Mawatari, Y., Effect of vertical vibration and particle size on the solids hold-up and mean bubble behavior in a pseudo-2D fluidized bed (2016) Chemical Engineering Journal, 304, pp. 384-398.
Gómez-Hernández, J., Serrano, D., Soria-Verdugo, A., Sánchez-Delgado, S., Agglomeration detection by pressure fluctuation analysis during Cynara cardunculus L. gasification in a fluidized bed (2016) Chemical Engineering Journal, 284, pp. 640-649.
Fernández-Torrijos, M., Almendros-Ibáñez, J.A., Sobrino, C., Santana, D., ε-NTU relationships in parallel-series arrangements: Application to plate and tubular heat exchangers (2016) Applied Thermal Engineering, 99, pp. 1119-1132.
Blanco-Cano, L., Soria-Verdugo, A., Garcia-Gutierrez, L.M., Ruiz-Rivas, U., Modeling the thin-layer drying process of Granny Smith apples: Application in an indirect solar dryer (2016) Applied Thermal Engineering, 108, pp. 1086-1094.
Izquierdo-Barrientos, M.A., Fernández-Torrijos, M., Almendros-Ibáñez, J.A., Sobrino, C., Experimental study of fixed and fluidized beds of PCM with an internal heat exchanger (2016) Applied Thermal Engineering, 106, pp. 1042-1051.
Izquierdo-Barrientos, M.A., Sobrino, C., Almendros-Ibáñez, J.A., Barreneche, C., Ellis, N., Cabeza, L.F., Characterization of granular phase change materials for thermal energy storage applications in fluidized beds (2016) Applied Energy, 181, pp. 310-321.
Hernández-Jiménez, F., Sánchez-Prieto, J., Cano-Pleite, E., Garcia-Gutierrez, L.M., Acosta-Iborra, A., Development of an empirical wall-friction model for 2D simulations of pseudo-2D bubbling fluidized beds (2016) Advanced Powder Technology, 27 (2), pp. 521-530.
2015
Rodriguez-Sanchez, M.R., Sanchez-Gonzalez, A., Marugan-Cruz, C., Santana, D., Flow patterns of external solar receivers (2015) Solar Energy, 122, pp. 940-953.
Sánchez-González, A., Santana, D., Solar flux distribution on central receivers: A projection method from analytic function (2015) Renewable Energy, 74, pp. 576-587.
Rodriguez-Sanchez, M.R., Sanchez-Gonzalez, A., Santana, D., Revised receiver efficiency of molten-salt power towers (2015) Renewable and Sustainable Energy Reviews, 52, pp. 1331-1339.
Pla, D., Sánchez-González, A., Garbayo, I., Salleras, M., Morata, A., Tarancón, A., Is it possible to design a portable power generator based on micro-solid oxide fuel cells? A finite volume analysis (2015) Journal of Power Sources, 293, art. no. 21206, pp. 264-273.
Petrakopoulou, F., Iribarren, D., Dufour, J., Life-cycle performance of natural gas power plants with pre-combustion CO2 capture (2015) Greenhouse Gases: Science and Technology, 5 (3), pp. 268-276.
Garcia-Gutierrez, L.M., Soria-Verdugo, A., Ruiz-Rivas, U., Optimization of the feeding ports location in a fluidized bed combustor based on Monte Carlo simulations of fuel particles motion (2015) Fuel, 141, pp. 82-92.
Soria-Verdugo, A., Goos, E., García-Hernando, N., Effect of the number of TGA curves employed on the biomass pyrolysis kinetics results obtained using the Distributed Activation Energy Model (2015) Fuel Processing Technology, 134, art. no. 4464, pp. 360-371.
Serrano, D., Sánchez-Delgado, S., Sobrino, C., Marugán-Cruz, C., Defluidization and agglomeration of a fluidized bed reactor during Cynara cardunculus L. gasification using sepiolite as a bed material (2015) Fuel Processing Technology, 131, pp. 338-347.
Zacarías, A., Venegas, M., Lecuona, A., Ventas, R., Carvajal, I., Experimental assessment of vapour adiabatic absorption into solution droplets using a full cone nozzle (2015) Experimental Thermal and Fluid Science, 68, pp. 228-238.
Peters, J.F., Petrakopoulou, F., Dufour, J., Exergy analysis of synthetic biofuel production via fast pyrolysis and hydroupgrading (2015) Energy, 79 (C), pp. 325-336.
Kwapinska, M., Xue, G., Horvat, A., Rabou, L.P.L.M., Dooley, S., Kwapinski, W., Leahy, J.J., Fluidized Bed Gasification of Torrefied and Raw Grassy Biomass (Miscanthus × gigantenus). the Effect of Operating Conditions on Process Performance (2015) Energy and Fuels, 29 (11), pp. 7290-7300.
Briongos, J.V., Gómez-Hernández, J., Serrano, D., Santana, D., Unfolding the Phase Space Structure of Noisy Time Series by means of Angular First-Return Maps (2015) Discrete Dynamics in Nature and Society, 2015, art. no. 654181, .
Hernández-Jiménez, F., García-Gutiérrez, L.M., Soria-Verdugo, A., Acosta-Iborra, A., Fully coupled TFM-DEM simulations to study the motion of fuel particles in a fluidized bed (2015) Chemical Engineering Science, 134, pp. 57-66.
Sánchez-Prieto, J., Soria-Verdugo, A., Briongos, J.V., Santana, D., Stagnant regions estimation in fluidized beds from bed surface observation (2015) Chemical Engineering Journal, 281, pp. 109-118.
Cano-Pleite, E., Hernández-Jiménez, F., Acosta-Iborra, A., Compressible-gas two-fluid modeling of isolated bubbles in a vertically vibrated fluidized bed and comparison with experiments (2015) Chemical Engineering Journal, 271, pp. 287-299.
Sánchez-Prieto, J., Soria-Verdugo, A., Gómez-Hernández, J., Briongos, J.V., Santana, D., Maldistribution detection in bubbling fluidized beds (2015) Chemical Engineering Journal, 270, pp. 272-281.
Izquierdo-Barrientos, M.A., Sobrino, C., Almendros-Ibáñez, J.A., Energy storage with PCM in fluidized beds: Modeling and experiments (2015) Chemical Engineering Journal, 264, pp. 497-505.
Marugán-Cruz, C., Sánchez-Delgado, S., Rodríguez-Sánchez, M.R., Venegas, M., Santana, D., District cooling network connected to a solar power tower (2015) Applied Thermal Engineering, 79, pp. 174-183.
Izquierdo-Barrientos, M.A., Sobrino, C., Almendros-Ibáñez, J.A., Experimental heat transfer coefficients between a surface and fixed and fluidized beds with PCM (2015) Applied Thermal Engineering, 78, pp. 373-379.
Hdz-Jasso, A.M., Contreras-Valenzuela, M.R., Rodríguez-Martínez, A., Romero, R.J., Venegas, M., Experimental heat transformer monitoring based on linear modelling and statistical control process (2015) Applied Thermal Engineering, 75, pp. 1271-1286.
2014
Garcia-Gutierrez, L.M., Soria-Verdugo, A., Marugán-Cruz, C., Ruiz-Rivas, U., Simulation and experimental study on the motion of non-reacting objects in the freeboard of a fluidized bed (2014) Powder Technology, 263, pp. 112-120.
Sánchez-Prieto, J., Soria-Verdugo, A., Briongos, J.V., Santana, D., The effect of temperature on the distributor design in bubbling fluidized beds (2014) Powder Technology, 261, pp. 176-184.
Heredia-Molinero, M.C., Sánchez-Prieto, J., Briongos, J.V., Palancar, M.C., Feedback PID-like fuzzy controller for pH regulatory control near the equivalence point (2014) Journal of Process Control, 24 (7), pp. 1023-1037.
De Martín, L., Sánchez-Prieto, J., Hernández-Jiménez, F., Van Ommen, J.R., A settling tube to determine the terminal velocity and size distribution of fluidized nanoparticle agglomerates (2014) Journal of Nanoparticle Research, 16 (1), art. no. 2183, .
Iribarren, D., Susmozas, A., Petrakopoulou, F., Dufour, J., Environmental and exergetic evaluation of hydrogen production via lignocellulosic biomass gasification (2014) Journal of Cleaner Production, 69, pp. 165-175.
Peters, J.F., Petrakopoulou, F., Dufour, J., Exergetic analysis of a fast pyrolysis process for bio-oil production (2014) Fuel Processing Technology, 119, pp. 245-255.
Petrakopoulou, F., Tsatsaronis, G., Morosuk, T., CO2 capture in a chemical looping combustion power plant evaluated with an advanced exergetic analysis (2014) Environmental Progress and Sustainable Energy, 33 (3), pp. 1017-1025.
Rodriguez-Sanchez, M.R., Sanchez-Gonzalez, A., Marugan-Cruz, C., Santana, D., Saving assessment using the PERS in solar power towers (2014) Energy Conversion and Management, 87, pp. 810-819.
Soria-Verdugo, A., Garcia-Gutierrez, L.M., Blanco-Cano, L., Garcia-Hernando, N., Ruiz-Rivas, U., Evaluating the accuracy of the Distributed Activation Energy Model for biomass devolatilization curves obtained at high heating rates (2014) Energy Conversion and Management, 86, pp. 1045-1049.
Petrakopoulou, F., Tsatsaronis, G., Can carbon dioxide capture and storage from power plants reduce the environmental impact of electricity generation? (2014) Energy and Fuels, 28 (8), pp. 5327-5338.
Xue, G., Kwapinska, M., Horvat, A., Li, Z., Dooley, S., Kwapinski, W., Leahy, J.J., Gasification of miscanthus x giganteus in an air-blown bubbling fluidized bed: A preliminary study of performance and agglomeration (2014) Energy and Fuels, 28 (2), pp. 1121-1131.
Belmonte, J.F., Izquierdo-Barrientos, M.A., Eguía, P., Molina, A.E., Almendros-Ibáñez, J.A., PCM in the heat rejection loops of absorption chillers. A feasibility study for the residential sector in Spain (2014) Energy and Buildings, 80, pp. 331-351.
Hernández-Jiménez, F., Li, T., Cano-Pleite, E., Rogers, W., Acosta-Iborra, A., Characterization of the particle-wall frictional forces in pseudo-2D fluidized beds using DEM (2014) Chemical Engineering Science, 116, pp. 136-143.
Gómez-Hernández, J., Sánchez-Prieto, J., Briongos, J.V., Santana, D., Wide band energy analysis of fluidized bed pressure fluctuation signals using a frequency division method (2014) Chemical Engineering Science, 105, pp. 92-103.
Xue, G., Kwapinska, M., Horvat, A., Kwapinski, W., Rabou, L.P.L.M., Dooley, S., Czajka, K.M., Leahy, J.J., Gasification of torrefied Miscanthus×giganteus in an air-blown bubbling fluidized bed gasifier (2014) Bioresource Technology, 159, pp. 397-403.
Cutz, L., Santana, D., Techno-economic analysis of integrating sweet sorghum into sugar mills: The Central American case (2014) Biomass and Bioenergy, 68, pp. 195-214.
Rodríguez-Sánchez, M.R., Marugan-Cruz, C., Acosta-Iborra, A., Santana, D., Comparison of simplified heat transfer models and CFD simulations for molten salt external receiver (2014) Applied Thermal Engineering, 73 (1), pp. 993-1005.
Rodríguez-Sánchez, M.R., Soria-Verdugo, A., Almendros-Ibáñez, J.A., Acosta-Iborra, A., Santana, D., Thermal design guidelines of solar power towers (2014) Applied Thermal Engineering, 63 (1), pp. 428-438.
Gómez-García, A., Sánchez-Prieto, J., Soria-Verdugo, A., Santana, D., Moving bed syngas conditioning: Modelling (2014) Applied Thermal Engineering, 62 (2), pp. 809-822.
Rodríguez-Sánchez, D., Belmonte, J.F., Izquierdo-Barrientos, M.A., Molina, A.E., Rosengarten, G., Almendros-Ibáñez, J.A., Solar energy captured by a curved collector designed for architectural integration (2014) Applied Energy, 116, pp. 66-75.
Petrakopoulou, F., Lee, Y.D., Tsatsaronis, G., Simulation and exergetic evaluation of CO2 capture in a solid-oxide fuel-cell combined-cycle power plant (2014) Applied Energy, 114, pp. 417-425.
2013
Petrakopoulou, F., Tsatsaronis, G., Morosuk, T., Evaluation of a power plant with chemical looping combustion using an advanced exergoeconomic analysis (2013) Sustainable Energy Technologies and Assessments, 3, pp. 9-16.
Blanco-Cano, L., Soria-Verdugo, A., García-Gutiérrez, L.M., Ruiz-Rivas, U., Modelling and design of indirect solar dryers for batch drying (2013) Renewable Energy and Power Quality Journal, 1 (11), art. no. 542, pp. 1093-1098.
Rodríguez-Sanchez, M.R., Venegas-Bernal, M., Marugán-Cruz, C., Santana, D., Thermal, mechanical and hydrodynamic analysis to optimize the design of molten salt central receivers of solar tower power plants (2013) Renewable Energy and Power Quality Journal, 1 (11), art. no. 238, pp. 128-133.
Cutz, L., Sanchez-Delgado, S., Ruiz-Rivas, U., Santana, D., Bioenergy production in Central America: Integration of sweet sorghum into sugar mills (2013) Renewable and Sustainable Energy Reviews, 25, pp. 529-542.
Sánchez-Delgado, S., Marugán-Cruz, C., Soria-Verdugo, A., Santana, D., Estimation and experimental validation of the circulation time in a 2D gas-solid fluidized beds (2013) Powder Technology, 235, pp. 669-676.
Acosta-Iborra, A., Sánchez-Delgado, S., Scott, S.A., Müller, C.R., Dennis, J.S., Statistical accuracy of scattered points filters and application to the dynamics of bubbles in gas-fluidized beds (2013) Journal of Fluid Mechanics, 732, pp. 245-281.
Marugán-Cruz, C., Rodríguez-Rodríguez, J., Martínez-Bazán, C., Formation regimes of vortex rings in negatively buoyant starting jets (2013) Journal of Fluid Mechanics, 716, pp. 470-486.
Martínez-Legazpi, P., Rodríguez-Rodríguez, J., Marugán-Cruz, C., Lasheras, J.C., Plunging to spilling transition in corner surface waves in the wake of a partially submerged vertical plate (2013) Experiments in Fluids, 54 (1), art. no. 1437, .
Moreno-Rodriguez, A., Garcia-Hernando, N., González-Gil, A., Izquierdo, M., Experimental validation of a theoretical model for a direct-expansion solar-assisted heat pump applied to heating (2013) Energy, 60, pp. 242-253.
Iribarren, D., Petrakopoulou, F., Dufour, J., Environmental and thermodynamic evaluation of CO2 capture, transport and storage with and without enhanced resource recovery (2013) Energy, 50 (1), pp. 477-485.
Soria-Verdugo, A., Garcia-Hernando, N., Garcia-Gutierrez, L.M., Ruiz-Rivas, U., Analysis of biomass and sewage sludge devolatilization using the distributed activation energy model (2013) Energy Conversion and Management, 65, pp. 239-244.
Petrakopoulou, F., Tsatsaronis, G., Morosuk, T., Evaluating the potential for improvement of an oxy-fuel power plant with CO2 capture using an advanced exergetic analysis (2013) Energy and Fuels, 27 (8), pp. 4850-4858.
Garcia-Gutierrez, L.M., Soria-Verdugo, A., Garcia-Hernando, N., Ruiz-Rivas, U., Simulation of object motion in a bubbling fluidized bed using a monte carlo method (2013) Chemical Engineering Science, 96, pp. 26-32.
Briongos, J.V., Sobrino, C., Gómez-Hernández, J., Santana, D., Characterization of flow-induced vibrations in gas-solid fluidized beds: Elements of the theory (2013) Chemical Engineering Science, 93, pp. 181-196.
Hernández-Jiménez, F., Sánchez-Prieto, J., Soria-Verdugo, A., Acosta-Iborra, A., Experimental quantification of the particle-wall frictional forces in pseudo-2D gas fluidised beds (2013) Chemical Engineering Science, 102, pp. 257-267.
Izquierdo-Barrientos, M.A., Sobrino, C., Almendros-Ibáñez, J.A., Thermal energy storage in a fluidized bed of PCM (2013) Chemical Engineering Journal, 230, pp. 573-583.
Hernández-Jiménez, F., Gómez-García, A., Santana, D., Acosta-Iborra, A., Gas interchange between bubble and emulsion phases in a 2D fluidized bed as revealed by two-fluid model simulations (2013) Chemical Engineering Journal, 215-216, pp. 479-490.
2012
Petrakopoulou, F., Tsatsaronis, G., Morosuk, T., Carassai, A., Advanced exergoeconomic analysis applied to a complex energy conversion system (2012) Journal of Engineering for Gas Turbines and Power, 134 (3), art. no. 031801, .
Petrakopoulou, F., Tsatsaronis, G., Production of hydrogen-rich fuels for pre-combustion carbon capture in power plants: A thermodynamic assessment (2012) International Journal of Hydrogen Energy, 37 (9), pp. 7554-7564.
García, D.F., García, B., Burgos, J.C., García-Hernando, N., Determination of moisture diffusion coefficient in transformer paper using thermogravimetric analysis (2012) International Journal of Heat and Mass Transfer, 55 (4), pp. 1066-1075.
Venegas, M., Zacarías, A., Vereda, C., Lecuona, A., Ventas, R., Subcooled and saturated boiling of ammonia-lithium nitrate solution in a plate-type generator for absorption machines (2012) International Journal of Heat and Mass Transfer, 55 (17-18), pp. 4914-4922.
García, D.F., García, B., Burgos, J.C., Hernando, N.G., Experimental determination of the diffusion coefficient of water in transformer solid insulation (2012) IEEE Transactions on Dielectrics and Electrical Insulation, 19 (2), art. no. 6180235, pp. 427-433.
Fryda, L., Sobrino, C., Glazer, M., Bertrand, C., Cieplik, M., Study of ash deposition during coal combustion under oxyfuel conditions (2012) Fuel, 92 (1), pp. 308-317.
Petrakopoulou, F., Tsatsaronis, G., Morosuk, T., Advanced exergoenvironmental analysis of a near-zero emission power plant with chemical looping combustion (2012) Environmental Science and Technology, 46 (5), pp. 3001-3007.
Moreno-Rodríguez, A., González-Gil, A., Izquierdo, M., Garcia-Hernando, N., Theoretical model and experimental validation of a direct-expansion solar assisted heat pump for domestic hot water applications (2012) Energy, 45 (1), pp. 704-715.
Petrakopoulou, F., Tsatsaronis, G., Morosuk, T., Paitazoglou, C., Environmental evaluation of a power plant using conventional and advanced exergy-based methods (2012) Energy, 45 (1), pp. 23-30.
Petrakopoulou, F., Tsatsaronis, G., Morosuk, T., Carassai, A., Conventional and advanced exergetic analyses applied to a combined cycle power plant (2012) Energy, 41 (1), pp. 146-152.
Gómez-Hernández, J., Soria-Verdugo, A., Briongos, J.V., Santana, D., Fluidized bed with a rotating distributor operated under defluidization conditions (2012) Chemical Engineering Journal, 195-196, pp. 198-207.
Izquierdo-Barrientos, M.A., Belmonte, J.F., Rodríguez-Sánchez, D., Molina, A.E., Almendros-Ibáñez, J.A., A numerical study of external building walls containing phase change materials (PCM) (2012) Applied Thermal Engineering, 47, pp. 73-85.
Ventas, R., Vereda, C., Lecuona, A., Venegas, M., Rodríguez-Hidalgo, M.D.C., Effect of the NH 3-LiNO 3 concentration and pressure in a fog-jet spray adiabatic absorber (2012) Applied Thermal Engineering, 37, pp. 430-437.
Vereda, C., Ventas, R., Lecuona, A., Venegas, M., Study of an ejector-absorption refrigeration cycle with an adaptable ejector nozzle for different working conditions (2012) Applied Energy, 97, pp. 305-312.
Ventas, R., Vereda, C., Lecuona, A., Venegas, M., Experimental study of a thermochemical compressor for an absorption/compression hybrid cycle (2012) Applied Energy, 97, pp. 297-304.
2011
Sánchez-Delgado, S., Almendros-Ibáñez, J.A., García-Hernando, N., Santana, D., On the minimum fluidization velocity in 2D fluidized beds (2011) Powder Technology, 207 (1-3), pp. 145-153.
de Martín, L., Briongos, J.V., García-Hernando, N., Aragón, J.M., Detecting regime transitions in gas-solid fluidized beds from low frequency accelerometry signals (2011) Powder Technology, 207 (1-3), pp. 104-112.
Petrakopoulou, F., Tsatsaronis, G., Morosuk, T., Exergoeconomic analysis of an advanced zero emission plant (2011) Journal of Engineering for Gas Turbines and Power, 133 (11), art. no. 113001, .
Petrakopoulou, F., Boyano, A., Cabrera, M., Tsatsaronis, G., Exergoeconomic and exergoenvironmental analyses of a combined cycle power plant with chemical looping technology (2011) International Journal of Greenhouse Gas Control, 5 (3), pp. 475-482.
Rodríguez-Rodríguez, J., Marugán-Cruz, C., Aliseda, A., Lasheras, J.C., Dynamics of large turbulent structures in a steady breaker (2011) Experimental Thermal and Fluid Science, 35 (2), pp. 301-310.
Izquierdo, M., Moreno-Rodríguez, A., González-Gil, A., García-Hernando, N., Air conditioning in the region of Madrid, Spain: An approach to electricity consumption, economics and CO2 emissions (2011) Energy, 36 (3), pp. 1630-1639.
Hernández-Jiménez, F., Sánchez-Delgado, S., Gómez-García, A., Acosta-Iborra, A., Comparison between two-fluid model simulations and particle image analysis & velocimetry (PIV) results for a two-dimensional gas-solid fluidized bed (2011) Chemical Engineering Science, 66 (17), pp. 3753-3772.
Soria-Verdugo, A., Garcia-Gutierrez, L.M., García-Hernando, N., Ruiz-Rivas, U., Buoyancy effects on objects moving in a bubbling fluidized bed (2011) Chemical Engineering Science, 66 (12), pp. 2833-2841.
Soria-Verdugo, A., Garcia-Gutierrez, L.M., Sanchez-Delgado, S., Ruiz-Rivas, U., Circulation of an object immersed in a bubbling fluidized bed (2011) Chemical Engineering Science, 66 (1), pp. 78-87.
Petrakopoulou, F., Tsatsaronis, G., Boyano, A., Morosuk, T., Exergoeconomic and exergoenvironmental evaluation of power plants including CO2 capture (2011) Chemical Engineering Research and Design, 89 (9), pp. 1461-1469.
Hernández-Jiménez, F., Third, J.R., Acosta-Iborra, A., Müller, C.R., Comparison of bubble eruption models with two-fluid simulations in a 2D gas-fluidized bed (2011) Chemical Engineering Journal, 171 (1), pp. 328-339.
Soria-Verdugo, A., García-Hernando, N., Almendros-Ibáñez, J.A., Ruiz-Rivas, U., Motion of a large object in a bubbling fluidized bed with a rotating distributor (2011) Chemical Engineering and Processing: Process Intensification, 50 (8), pp. 859-868.
Almendros-Ibáñez, J.A., Soria-Verdugo, A., Ruiz-Rivas, U., Santana, D., Solid conduction effects and design criteria in moving bed heat exchangers (2011) Applied Thermal Engineering, 31 (6-7), pp. 1200-1207.
Zacarías, A., Venegas, M., Ventas, R., Lecuona, A., Experimental assessment of ammonia adiabatic absorption into ammonia-lithium nitrate solution using a flat fan nozzle (2011) Applied Thermal Engineering, 31 (16), pp. 3569-3579.
Venegas, M., Rodríguez-Hidalgo, M.C., Salgado, R., Lecuona, A., Rodríguez, P., Gutiérrez, G., Experimental diagnosis of the influence of operational variables on the performance of a solar absorption cooling system (2011) Applied Energy, 88 (4), pp. 1447-1454.
Briongos, J.V., Sanchéz-Delgado, S., Acosta-Iborra, A., Santana, D., A novel approach for modeling bubbling gas-solid fluidized beds (2011) AIChE Journal, 57 (7), pp. 1733-1750.
2010
Sánchez-Delgado, S., Marugán-Cruz, C., Acosta-Iborra, A., Santana, D., Dense-phase velocity fluctuation in a 2-D fluidized bed (2010) Powder Technology, 200 (1-2), pp. 37-45.
Almendros-Ibáñez, J.A., Pallarès, D., Johnsson, F., Santana, D., Voidage distribution around bubbles in a fluidized bed: Influence on throughflow (2010) Powder Technology, 197 (1-2), pp. 73-82.
Petrakopoulou, F., Tsatsaronis, G., Morosuk, T., Conventional exergetic and exergoeconomic analyses of a power plant with chemical looping combustion for CO2 capture (2010) International Journal of Thermodynamics, 13 (3), pp. 77-86.
Petrakopoulou, F., Boyano, A., Cabrera, M., Tsatsaronis, G., Exergy-based analyses of an advanced zero emission plant (2010) International Journal of Low-Carbon Technologies, 5 (4), pp. 231-238.
Zacarías, A., Ventas, R., Venegas, M., Lecuona, A., Boiling heat transfer and pressure drop of ammonia-lithium nitrate solution in a plate generator (2010) International Journal of Heat and Mass Transfer, 53 (21-22), pp. 4768-4779.
Fryda, L., Sobrino, C., Cieplik, M., Van De Kamp, W.L., Study on ash deposition under oxyfuel combustion of coal/biomass blends (2010) Fuel, 89 (8), pp. 1889-1902.
Acosta-Iborra, A., Garcia, N., Rodriguez, P.A., Coupled heat and mass transfer during absorption of water vapor into libr-H2O solution fan sheets (2010) Computational Thermal Sciences, 2 (3), pp. 203-220.
de Martín, L., Villa Briongos, J., Aragón, J.M., Palancar, M.C., Can low frequency accelerometry replace pressure measurements for monitoring gas-solid fluidized beds? (2010) Chemical Engineering Science, 65 (13), pp. 4055-4064.
Ventas, R., Lecuona, A., Zacarías, A., Venegas, M., Ammonia-lithium nitrate absorption chiller with an integrated low-pressure compression booster cycle for low driving temperatures (2010) Applied Thermal Engineering, 30 (11-12), pp. 1351-1359.
2009
Lecuona, A., Ventas, R., Venegas, M., Zacarías, A., Salgado, R., Optimum hot water temperature for absorption solar cooling (2009) Solar Energy, 83 (10), pp. 1806-1814.
Marugán-Cruz, C., Rodríguez-Rodríguez, J., Martínez-Bazán, C., Negatively buoyant starting jets (2009) Physics of Fluids, 21 (11), art. no. 041910PHF, pp. 1-14.
Acosta-Iborra, A., Campo, A., Approximate analytic temperature distribution and efficiency for annular fins of uniform thickness (2009) International Journal of Thermal Sciences, 48 (4), pp. 773-780.
Sobrino, C., Acosta-Iborra, A., Santana, D., de Vega, M., Bubble characteristics in a bubbling fluidized bed with a rotating distributor (2009) International Journal of Multiphase Flow, 35 (10), pp. 970-976.
García-Hernando, N., Acosta-Iborra, A., Ruiz-Rivas, U., Izquierdo, M., Experimental investigation of fluid flow and heat transfer in a single-phase liquid flow micro-heat exchanger (2009) International Journal of Heat and Mass Transfer, 52 (23-24), pp. 5433-5446.
Acosta-Iborra, A., García, N., Santana, D., Modelling non-isothermal absorption of vapour into expanding liquid sheets (2009) International Journal of Heat and Mass Transfer, 52 (13-14), pp. 3042-3054.
Almendros-Ibáñez, J.A., Pallarès, D., Johnsson, F., Santana, D., Novel approach to characterize fluidized bed dynamics combining particle image velocimetry and finite element method (2009) Industrial and Engineering Chemistry Research, 48 (10), pp. 5010-5023.
Sobrino, C., Almendros-Ibáñez, J.A., Santana, D., Vázquez, C., de Vega, M., Maximum entropy estimation of the bubble size distribution in fluidized beds (2009) Chemical Engineering Science, 64 (10), pp. 2307-2319.
Almendros-Ibáñez, J.A., Sánchez-Delgado, S., Sobrino, C., Santana, D., Experimental observations on the different mechanisms for solid ejection in gas-fluidized beds (2009) Chemical Engineering and Processing: Process Intensification, 48 (3), pp. 734-744.
Soria-Verdugo, A., Almendros-Ibáñez, J.A., Ruiz-Rivas, U., Santana, D., Exergy optimization in a steady moving bed heat exchanger (2009) Annals of the New York Academy of Sciences, 1161, pp. 584-600.
2008
Sobrino, C., Almendros-Ibañez, J.A., Santana, D., de Vega, M., Fluidization of Group B particles with a rotating distributor (2008) Powder Technology, 181 (3), pp. 273-280.
Oñate, L.M., Briongos, J.V., Aragón, J.M., Palancar, M.C., Advances in pipeline engineering and in flow control (II): Reynolds’ study of transition through chaotic-determinant tools [Avances en la ingeniería de tuberías y en el control del flujo (II): Estudio del Reynolds de transición mediante herramientas caótico-deterministas] (2008) Ingenieria Quimica, 40 (462), pp. 314-324.
Oñate, L.M., Briongos, J.V., Aragón, J.M., Palancar, M.C., Advances in pipeline engineering and in flow control (I): Problems of transitions between systems [Avances en la ingeniería de tuberías y en el control del flujo (I): Problemática de las transiciones entre regímenes] (2008) Ingenieria Quimica, 40 (461), pp. 84-88.
Asdrubali, F., Bonaut, M., Battisti, M., Venegas, M., Comparative study of energy regulations for buildings in Italy and Spain (2008) Energy and Buildings, 40 (10), pp. 1805-1815.
Gómez-Barea, A., Leckner, B., Santana, D., Ollero, P., Gas-solid conversion in fluidised bed reactors (2008) Chemical Engineering Journal, 141 (1-3), pp. 151-168.
2007
Pawlak, G., Marugan Cruz, C., Martínez Bazán, C., García Hrdy, P., Experimental characterization of starting jet dynamics (2007) Fluid Dynamics Research, 39 (11-12), pp. 711-730.
Briongos, J.V., Aragón, J.M., Palancar, M.C., Phase space structure and multi-resolution analysis of gas-solid fluidized bed hydrodynamics: Part II: Dynamic analysis (2007) Chemical Engineering Science, 62 (11), pp. 2865-2879.
2006
Villa Briongos, J., Aragón, J.M., Palancar, M.C., Fluidised bed dynamics diagnosis from measurements of low-frequency out-bed passive acoustic emissions (2006) Powder Technology, 162 (2), pp. 145-156.
Santana, D., Macías-Machín, A., Model of fluidized bed elutriation: Effect of the initial mass of fine particles in the bed (2006) Journal of the Chinese Institute of Chemical Engineers, 37 (2), pp. 203-207.
Santana, D., Rodríguez-Rodríguez, J., Almendros-Ibáñez, J.A., Martínez-Bazán, C., Characteristic lengths and maximum entropy estimation from probe signals in the ellipsoidal bubble regime (2006) International Journal of Multiphase Flow, 32 (9), pp. 1123-1139.
Socorro, M., Macías-Machín, A., Verona, J.M., Santana, D., Hot gas filtration and heat exchange in a packed bed using Lapilli as a granular medium (2006) Industrial and Engineering Chemistry Research, 45 (23), pp. 7957-7966.
Villa Briongos, J., Aragón, J.M., Palancar, M.C., Phase space structure and multi-resolution analysis of gas-solid fluidized bed hydrodynamics: Part I – The EMD approach (2006) Chemical Engineering Science, 61 (21), pp. 6963-6980.
Almendros-Ibáñez, J.A., Sobrino, C., de Vega, M., Santana, D., A new model for ejected particle velocity from erupting bubbles in 2-D fluidized beds (2006) Chemical Engineering Science, 61 (18), pp. 5981-5990.
2005
Santana, D., Nauri, S., Acosta, A., García, N., Macías-Machín, A., Initial particle velocity spatial distribution from 2-D erupting bubbles in fluidized beds (2005) Powder Technology, 150 (1), pp. 1-8.
Venegas, M., Rodríguez, P., Lecuona, A., Izquierdo, M., Spray absorbers in absorption systems using lithium nitrate-ammonia solution (2005) International Journal of Refrigeration, 28 (4), pp. 554-564.
Izquierdo, M., Venegas, M., García, N., Palacios, E., Exergetic analysis of a double stage LiBr-H 2O thermal compressor cooled by air/water and driven by low grade heat (2005) Energy Conversion and Management, 46 (7-8), pp. 1029-1042.
Briongos, J.V., Soler, J.G., State space analysis, a tool for progress (2005) Computer Aided Chemical Engineering, 20 (C), pp. 43-48.
Briongos, J.V., Guardiola, J., New methodology for scaling hydrodynamic data from a 2D-fluidized bed (2005) Chemical Engineering Science, 60 (18), pp. 5151-5163.
Venegas, M., Izquierdo, M., Rodríguez, P., Nogueira, J.I., Design of spray absorbers for LiNO 3-NH 3 absorption refrigeration systems (2005) Atomization and Sprays, 15 (4), pp. 439-456.
2004
Izquierdo, M., Venegas, M., Rodríguez, P., Lecuona, A., Crystallization as a limit to develop solar air-cooled LiBr-H2O absorption systems using low-grade heat (2004) Solar Energy Materials and Solar Cells, 81 (2), pp. 205-216.
Lecuona, A., Nogueira, J., Rodríguez, P.A., Acosta, A., PIV evaluation algorithms for industrial applications (2004) Measurement Science and Technology, 15 (6), pp. 1027-1038.
Venegas, M., Izquierdo, M., Rodríguez, P., Lecuona, A., Heat and mass transfer during absorption of ammonia vapour by LiNO3-NH3 solution droplets (2004) International Journal of Heat and Mass Transfer, 47 (12-13), pp. 2653-2667.
Villa Briongos, J., Guardiola Soler, J., Using free bed surface fluctuations in a 3-D fluidized bed for dynamic characterization (2004) AIChE Journal, 50 (12), pp. 3060-3067.
2003
Briongos, J.V., Soler, J.G., Free top fluidized bed surface fluctuations as a source of hydrodynamic data (2003) Powder Technology, 134 (1-2), pp. 133-144.
Venegas, M., Arzoz, D., Rodríguez, P., Izquierdo, M., Heat and mass transfer in LiNO3-NH3 spray absorption system (2003) International Communications in Heat and Mass Transfer, 30 (6), pp. 805-815.
Villa, J., Van Ommen, J.R., Van den Bleek, C.M., Early detection of foam formation in bubble columns by attractor comparison (2003) AIChE Journal, 49 (9), pp. 2442-2444.
2002
Nogueira, J., Lecuona, A., Ruiz-Rivas, U., Rodríguez, P.A., Analysis and alternatives in two-dimensional multigrid particle image velocimetry methods: Application of a dedicated weighting function and symmetric direct correlation (2002) Measurement Science and Technology, 13 (7), pp. 963-974.
Lecuona, A., Ruiz-Rivas, U., Nogueira, J., Simulation of particle trajectories in a vortex-induced flow: Application to seed-dependent flow measurement techniques (2002) Measurement Science and Technology, 13 (7), pp. 1020-1028.
Lecuona, A., Nogueira, J., Rodríguez, P.A., Santana, D., Accuracy and time performance of different schemes of the local field correction PIV technique (2002) Experiments in Fluids, 33 (6), pp. 743-751.
Lecuona, A., Ruiz-Rivas, U., Rodríguez-Aumente, P., Near field vortex dynamics in axially forced, co-flowing jets: Quantitative description of a low-frequency configuration (2002) European Journal of Mechanics, B/Fluids, 21 (6), pp. 701-720.
2001
Rodríguez-Aumente, P., Ruiz-Rivas, U., Lecuona, A., Near field vortex dynamics in axially forced, laminar, co-flowing jets: A descriptive study of the flow configurations (2001) European Journal of Mechanics, B/Fluids, 20 (5), pp. 673-698.
2000
Santana, D., Macías-Machín, A., Local bubble-size distribution in fluidized beds (2000) AIChE Journal, 46 (7), pp. 1340-1347.
1999
Santana, D., Rodríguez, J.M., Macías-Machín, A., Modelling fluidized bed elutriation of fine particles (1999) Powder Technology, 106 (1-2), pp. 110-118.
1998
Macías-Machín, A., Santana, D.J., Calculate ΔP of a fixed-bed filter (1998) Chemical Engineering, 105 (10), pp. 159-162.
